PRODUCT INTRODUCTION
PRODUCT ADVANTAGES
The combined transformer used in wind power generation is a static transformer which integrates the body of booster transformer, switchgear, high voltage current limiting fuse, tapping switch and corresponding auxiliary equipment. In view of the particularity of wind power generation, it provides reasonable solutions for users and is an ideal auxiliary booster transformer for wind power generation units.
Model description:
Service condition:
1. The altitude shall not exceed 2000 m;
2. Ambient temperature: The highest temperature is 45 ºC and the lowest temperature is-40 ºC;
3. Relative air humidity: Daily relative humidity is not over 95%, monthly average is not over 90%;
4. The outdoor wind speed shall not exceed 35 m/s;
5. The inclination of the ground shall not exceed 3 °;
6. The waveform of the power supply voltage is approximately sine wave and the three-phase power supply voltage is approximately symmetrical;
7. No explosion risk, fire, serious contamination, chemical corrosion or severe vibration at the installation site.
PERFORMANCE CHARACTERISTICS
1. The combined transformer adopts "mesh"-shaped structure, which is small in size, compact in structure and smooth in lifting;
2. The high-voltage side is fully sealed and equipped with live display, which meets the five protection requirements of high-voltage products to ensure personal safety;
3. It can be used in the ring network and terminals and is in convenient conversion;
4. The box adopts anti-theft structure
PRODUCT SIZE
APPLICATION AREA
This product is suitable for 10 kV and 35 kV terminal power supply system, as transformation, distribution, measurement, control and protection device. It is a kind of special transformation equipment that increases the voltage of 0.6~0.69kV sent by wind turbines to 35kV, and then connects to the grid for output. Different from the traditional box-type substation, the high-voltage load switch, fuse, and high-voltage components and transformer body, the non-excitation taping switch is fully sealed in two separate oil chambers, which have compact structure and stable operation. In addition, low-voltage distribution devices can be configured as required. This product is suitable for all kinds of wind power plant construction which is the best matching product of wind power system.
COMPANY PROFILE
ABOUT US
Shanxi Huaxin Electric Co., Ltd. is located in Yangquan, the largest anthracite base in China. Founded in May 2003, the company's registered capital was RMB 114 million, with total assets of RMB 815 million and the existing staff of over 1100. At present, our company has six industrial parks, divided into Changling Industrial Park, Four Mining Industrial Park, Lock Spring Industrial Park, Taiyuan Industrial Park, Jinnan Remanufacturing Park, and Jindong Remanufacturing Park, covering a total area of over 650 acres.
Our company has more than 30 patents now, mainly engaged in the R&D and production of intelligent electric automation, intelligent transportation and lifting, intelligent warehousing, power system, ventilation fluid and other series of over 80 products.
Our company has registered five R&D institutions in Beijing, Shenyang, Shanghai and Taiyuan, laying a solid foundation for technical upgrading and renewing generation for products. And it has been responsible for the production of the high-efficiency, energy-saving core technology products required by the national Eleventh Five-year plan, and the research and development of the high-efficiency permanent magnet motor and frequency conversion control, the key projects of national energy-saving for the Twelfth Five-year plan.
CERTIFICATIONS
AWARDS
1.High-tech Enterprise, Provincial Technology Center
2.Two-phase Fusion Demonstration Enterprises
3.China Quality and Integrity Enterprise
4.Shanxi Top 100 Enterprises
5.Shanxi Top 100 Manufacturing Enterprises
6.Following Contract and Observing Credit Enterprise
7.Shanxi Quality and Reputation AAA-Class Enterprise
8.Small and Medium-sized Enterprises of Science and Technology
9.Technology Center of Shanxi Small and Medium-sized Enterprises
10.ISO9001 Quality Management System
11.ISO14001 Environmental Management System
12.ISO18001 Occupational Health and Safety Management System
13.National Torch Program
14.Golden Bridge Award of China Technical Market
15.Measurement Guarantee Unit
ACHIEVEMENTS
1.The first production enterprise in rare earth flameproof permanent magnet motor and flameproof flat coil core transformer for mining.
2.One of the country's three major mining transformation production bases, and the largest coal machine equipment manufacturing enterprise in Shanxi province.
3.The permanent magnet direct drive motor and frequency conversion control produced by our company, have put into use in Zhengzhou Coal Industry Group, Shanxi Coal and Chemical Industry Group, Yangquan Coal Industry Group and other major coal industry groups.
4.Distribution transformer products have been successfully shortlisted as qualified suppliers for National Power Grid and China Southern Power Grid.
ATTENTION
1.The payment term: We accept TT, 30% deposit and 70% balance against copy of BL.
2. The delivery time: Usually it will take about 3 months.
3. The standard of package: Usually use strong plywood case for protection.
4. Warranty: In 12 months since BL date.
SERVICE
1. Reply within 24 hours.
2. Perfect service commitment.
3. Provide services during the pre-sales, in-sales and after-sales, all the way (Including quality warranty).
4. Be free of charge in training and tutoring after sales.
CONTACT US
Foreign Trade Manager: Miss Evelin
Audited Supplier 
){kind=link}
){kind=link}